Featured
Stihl Powerbox 3 – 2 AP500S batteries and 1 AL501 fast charger
Battery box (Systainer³ System) size S with 2x AP 500 S battery and AL 501 fast charger: For convenient transport and safe storage of batteries and charger
The STIHL battery box (Systainer3 System) size S is ideal for safe and orderly storage or for transporting your AP batteries and an accompanying fast charger. In addition to the battery box, this set includes two STIHL AP 500 S batteries and a STIHL AL 501 fast charger.
The Systainer3 Box is made of robust plastic and is lightweight and resistant. Inside the STIHL battery box size S, you can remove your batteries from the STIHL AP system and insert the charger into the molded thermoformed insert to prevent slipping and protect them from damage in the event of impact. The practical front carrying handle of the STIHL Cordless Box S supports comfortable and ergonomic carrying. With the T-Loc closure, you can not only quickly close or open the handy STIHL size S cordless box with one hand, but also connect it to a box stack with other STIHL cordless boxes from the Systainer3 system. Within the stack, each box remains separately accessible.
All STIHL cordless boxes (Systainer3 System) are compatible with other Systainers. They are also compatible with the bott vario3 systems.
The STIHL battery box (Systainer3 System) size S offers space for 2 AP batteries from the STIHL AP system and a battery fast charger.
Capstan winch – Stihl battery operated
Portable Capstan Winch 1200B
- 1200kg capacity on a single line. Can be increased by using pulleys/snatch blocks
- Powered by a STIHL Battery (not included)
- Speed 13m per minute
- 12kg weight
- The safety brake is applied when the rope is released
- Operates with a 9.5mm rope of any length
- STIHL AP500S or AP300S Battery required
With an engine output of 1.7 kW and a pulling capacity of up to 1,200 kg, this pulls more than 90 times its own weight (12 kg) and can be easily carried to any location by using lightweight synthetic ropes.
The EDER – WINCH 1200 is controlled outside the danger zone. By pulling lightly on the rope, the throttle trigger of the control unit is moved, and the winch starts to pull.
Maximum safety thanks to the rope brake! As soon as the operator releases the rope, the winch stops and the rope is clamped in the brake. This prevents the load from slipping back unintentionally. The brake can, however, be released manually.
GRIPSTRIP – 25m
Gripstrip is an anti-skid, self-adhesive, overbanding joint
and crack sealing tape. Gripstrip consists of an extruded
bituminous compound modified with elastomers and fast-bonding resins.
WHERE TO USE?
Horizontal cracks in asphaltic roads
Transverse and longitudinal joints
Trench reinstatements
Patch repairs
Drain or manhole frames
PREPARATION
Ensure that the joint or crack is dry, clean and free from
dust, fuel and oil spillage. For best results, use when
the ambient temperature is 15°C or above. Gripstrip should
not be applied to cracks wider than 10mm unless the
crack has been pre-filled with approved material such as
Jointfill A2, Jointfill N1 & N2 or Leoseal R.
APPLICATION
Gripstrip is applied to the road surface manually or with
a specially adapted trolley. It is self-adhesive with the
underside protected by peel-off backing paper.
Once laid, heavy foot pressure should be applied to assist
adhesion. Applied Gripstrip will become embedded
through trafficking.
COVERAGE
Each roll will overband 25 linear metres.
PACKAGING
Gripstrip is supplied in a box with 2 x 40mm x 25m rolls.
STORAGE
Keep dry. Store under cover.
STANDARDS
Gripstrip has a skid resistance value of ≥60 and therefore
complies with the requirements of the New Roads and
Street Works Act.
CABLE GUIDE ROLLER – CHAIN – 3-PART
CABLE GUIDE ROLLER – CHAIN – 3-PART





















